The Transpose: value can range from -9 to +9. If the A4: value is set to "default" as shown above, it will use the A4: value in the -Settings- section. Name: Guitar // A name for the tuning, up to 8 charactersĮach open tuning can have its own value for the A4 reference and transposition. Mode: GUIT // One of the 5 modes, GUIT, BASS, CST1, CST2, CST3 The example below is for a standard guitar in equal temperament. Each string will have a note, and octave, and a cents offset. STAY_ON If this is set to 1, the tuner will power up when external power is first applied, such as when powering up your pedal board.Īn typical open tuning section is shown below. Not recommended when powering the tuner from a battery. If PASSTHROUGH_MODE is 1, the tuner is always on. The footswitch turns the tuner on and off. If PASSTHROUGH_MODE is 0, the input signal is always passed through to the output. The PASSTHROUGH_MODE setting only applies to the ST-300 full size when it is set to passthrough mode via the internal DIP switches. The five modes are listed by name, and can be set to OpenTuning or Temperament. There are up to five Open Tuning sections (one for each mode) and up to five Temperament sections. The tuning file format has three sections, Settings, Open Tuning and Temperament. With the tuner connected the screen should look similar to this:Ĭlick the Download button and the settings, open tunings and temperaments will be downloaded from the tuner and inserted into the edit window. Run the program, plug in the tuner and turn it on. The latest revision is 2.11 If you bought your tuner after Jit already has revision 2.11.ĭownload the updater program (ST3update2.11.exe) by clicking here: ST-300 UpdateĬonnect the tuner to the USB port, turn it on, then run the ST3update2.10.exe program.ĭownload the installer: ST300 Editor Setup Install the driver first, then connect the tuner and turn it on. If you have a 64 bit machine it will tell you. If you are not sure which one you need, start with the one for 32 bits. Install the drivers before plugging in the tuner. In the zip file there are two installation files: For Windows 8 or 10, download Win8_Drivers.zip If you are running Windows XP, or if you have disabled automatic updates, do a manual installation.įor Windows XP, Vista or Windows 7, download Win7_Drivers.zip. The updater and ST300 Editor software works with Windows XP, Vista, 7, 8 and 10.Īn Apple version is in the works and will be avaialble soon.įor Windows Vista, 7, 8 and 10 the driver should automatically install when you connect the tuner to the computer with a USB cable and turn tuner on. Before ST300 Editor can communicate, you must first install the driver and update the tuner's firmware if necessary. The tuner is accessed with ST300 Editor program. The settings can be saved in an ASCII text file which allows you to easily upload different offsets and freely share them with others. With the USB port you can easily modify the tuner's settings, Open Tuning offsets and Temperament offsets. Home | FAQ | Find Out More | Features & Specs | Video Demos | Owner's Manuals | Guarantee | Contact 1 Hz increments.Įxternal 9 Volt DC adapter (not included).The Turbo Tuner ST-200 Stompbox Strobe Tuner - Owner's Manual 02 Cents (calibrated crystal oscillator)Ī4 = 300.0 Hz to 599.9 Hz in. Any 9 Volt adapter designed for stomp boxes will work fine.ģ.73" (9.5cm) x 1.59" (4.0cm) x 1.18" (3.0cm) HxWxD ![]() The Turbo Tuner ST-300 Mini operates from an external 9 Volt adaptor. The ST-300 can store a total of 5 different temperaments, in addition to the equal temperament. The ST-300 can operate in the equal temperament or any 12 note temperament the user desires. 1Hz, over the range of 300.0 Hz to 599.9 Hz. Reference Pitch Changeīy default, the tuner uses A4=440Hz as the reference pitch. The ST-300 remembers the settings for mode, drop tuning and A4 changes. The tuner comes with a number of pre-defined tunings for stringed instruments. In this mode the tuner only recognizes notes that are defined for the specified tuning. Permits tuning to any of the 12 notes from C0 to C8, in any temperament. The internal timing generator is calibrated at the factory to maintain a precision of ±.02 cents. It is completely disconnected from all internal circuitry and the tuner puts zero load on the signal. The output of the ST-300 is muted when the tuner is on, and when off the input signal is passed directly to the output. This gives zero latency and instantly shows the slightest tuning error. The ring of LEDs is a true stroboscope, driven directly by the analog input signal and a precision internal frequency reference. Easy to read display instantly shows the slightest difference in pitch of the note played from the indicated note.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |